Mechanical Seal Service and Repair

We can repair your Mechanical seals to look and perform like new. 

We Repair

All types of Mechanical Seals

Seal Repair

Quality Seal Repairs

Mechanical seal repair can make your pump seals look new even when they start like this or worse.

If you use seals you know repairing them can easily save you 50% of the cost of a new seal. With the exception of the most common throw-away seals, Repairing Seals Will Save You Money.

We repair all brands and all styles. We also replicate competitive brand seals, so if your seal is not repairable we can build you a new one at a lower cost than you are now paying!

Repaired seals can also be upgraded by replacing Carbon faces with Silicon or Tungsten Carbide for much less than upgrading to a new seal.

All of the seals we repair are: cleaned or sand blasted, inspected for factory tolerance, receive new faces if required (otherwise lapped), new springs, new elastomer ( rubber boot or o-rings), new set screws, new setting clips (if a cartridge seal), lapped to industry standards (2-3 light bands) assembled and shipped.

We Repair Seals From:

  • Anchor Packing Co

  • Angst Pfister

  • Borg Warner

  • Busack

  • Burgmann

  • Chesterton

  • Crane

  • Depac

  • Durametallic

  • Five Star

  • Flexibox

  • Flygt

  • Garlock

  • Hecker Werke

  • Latty

  • N.O.K.

  • Pacific

  • Robco

  • Roten

  • Rotoflex

  • Sealtec

  • Sealol

  • Sepco

  • Weston

Machining replacement parts

We produce repair parts to meet or exceed OEM specifications.

Lapping to 2 - 3 light bands

Lapping seal faces to OEM standards of 2 – 3 light bands is critical to maintaining a quality seal.

Lapped Seal face

A flat mechanical seals face shows parallel lines after lapping

Not all seal repairs are alike.  If the seal is not inspected for a flat finish, it may have just been made to look finished, but not be truely flat.

After Repair

This seal was actually repaired in our shop.

After cleaning, replacement of the seal face, set screws, secondary seal and springs (if required). The seal face is properly lapped flat.

Ship your seals to us at:

American Seal & Packing
1537 E. McFadden Ave. Suite A
Santa Ana, CA. 92705
Phone: 714-361-1435
Fax: 714-593-9701

We always back our service!
If you have any questions or comments please send us an e-mail

There is no sealing device more expensive than a cheap one.

We are unique.  Most distributors are tied to one major line and promote only that line.  We offer multiple lines because no one sealing company is good at, or most cost effective in all the product segments they offer. Let us help you get the most for your money.

Mechanical Seals

How much can I save by repairing my seals?

While most mechanical seal suppliers will advertise the cost of a mechanical seal is 50% of a new seal, we can do better.  We charge only for what needs to be repaired. Often all a seal needs are new sealing elastomers (o-rings, rubber boot or gaskets). The faces are always lapped and polished flat.  Where seal repairs get expensive is when seal faces have to be replaced. However, even when we have to replace the seal faces, springs, elastomers set screws, etc, our repair cost is often less than our competitors.

Get In Touch

(888) 654-SEAL

1537 E. McFadden Ave-A
Santa Ana, CA. 92705


Technical Support:

Open Hours:
Mon: 7:30am - 5pm
Tue: 7:30am - 5pm
Wed: 7:30am - 5pm
Thur: 7:30am - 5pm
Fri: 7:30am - 5pm
Sat: Closed
Sun: Closed

Send A Message