QMI PTFE Treatments
PTFE
Lubricants
QMI All-Purpose Grease Is A Custom Engineered, Non-Melting Grease Blended With PTFE To Meet The Most Demanding Grease Lubrication Conditions Today. This Unique Grease Goes Beyond Traditional Lubrication By Fusing PTFE Into Metal Surfaces At Critical Friction Points.
QMI PTFE Greases
Functional Under Conditions Ranging From -20F To + 550F, This Grease Offers All Weather Pumpability, Anti-Rust Protection, And Is Resistant To Water Penetration Even When Subjected To Extreme Moisture Conditions. It “Stays Put” With Superior Adhesion And Cohesion. Use Of This Grease May Extend Lubrication Cycles By As Much As Five To One.
- 220 Water Resistant Grease * Non-Melting Grease
- H-1 Food Grade Grease * White Lithium Grease
QMI PTFE Engine Treatments
Treatment Is Applied With Fresh Oil At Oil Change. During Operation The Lubrication System Carries QMI Throughout. First, Friction Surface Pores Are Cleaned.
- QMI ENGINE TREATMENT
- QMI SMALL ENGINE TREATMENT
- QMI AUTOMATIC TRANSMISSION TREATMENT
QMI Gear Treatment Is Applied With Current-Use Oil (Or At Oil Change). During Operation The Lubrication System Carries The Treatment Throughout. Then QMI’s Bonding Agents React With Mechanical Action To Fuse A Sub-Micron Film Of PTFE Into Critical Friction Surfaces.
- QMI GEAR TREATMENT
- QMI BARRIER CREAM
- QMI METAL PREP
- QMI PAINT SEALANT with PTFE
The Cleaning And Treating Process Of QMI Air Tool Treatment Often Frees Gummed-Up Vanes Or Blades, Restoring Torque And RPMs In Sluggish Air Tools. The Treatment Then Helps Maintain Optimum Perfo
- QMI AIR TOOL TREATMENT
- QMI COMPRESSOR TREATMENT
- QMI HYDRAULIC SYSTEM TREATMENT
PTFE
Lubricants
Get In Touch
(888) 654-SEAL
Location:
1537 E. McFadden Ave-A
Santa Ana, CA. 92705
sales@americansealandpacking.com
Technical Support:
technicalsupport@usseal.com
Mon: 7:30am - 5pm
Tue: 7:30am - 5pm
Wed: 7:30am - 5pm
Thur: 7:30am - 5pm
Fri: 7:30am - 5pm
Sat: Closed
Sun: Closed